MZ Double girders or beams heavy duty cabin control grab goliath crane
Product introduction:
Double girder grab bucket gantry crane is usually used in open-air warehouses or along railways. His control method is usually the driver’s cab or ground control. It looks in the shape of “A” in appearance, The span of double beam mobile rail grab gantry crane is usually 18-35 meters. Double girder grab bucket gantry cranes are suitable for open-air warehouses and workshops of metallurgical, cement, chemical and other enterprises to carry ore, limestone, ore powder, coke, coal, sand and other bulk particles indoors or in the open air and between fixed spans. Grab buckets are more suitable for bulk materials under natural accumulation. When grabbing underwater materials or special materials, they must be specifically mentioned in the order. When used in the open air, they must be equipped with waterproof equipment.
Technical parameters:
| 1 |
Name |
Double Girder Grab Bucket gantry crane |
Double Girder Grab Bucket gantry crane |
| 2 |
Capacity |
5t |
10t |
| 3 |
Span |
18-35m |
18-35m |
| 4 |
Lifting height |
+10,-10m |
+10,-10m |
| 5 |
Lifting speed |
37.08m/min |
40.92m/min |
| 6 |
Cross travel speed |
49.4m/min |
49.6m/min |
| 7 |
Long travel speed |
46.9/34.5m/min |
46.9/30.5m/min |
| 8 |
Control type |
Cabin control,remote control |
Cabin control,remote control |
| 9 |
Power supply |
380V 50Hz 3Ph AC |
380V 50Hz 3Ph AC |
| 10 |
Lifting motor |
YZR225M-8,22KW |
YZR280M-10,37KW |
| 11 |
Trolley traveling motor |
YZR160M1-6,5.5KW |
YZR160M1-6,5.5KW |
| 12 |
Crane long traveling motor |
YZR160L-6, 2*11KW |
YZR160L-6, 4*11KW |
| 13 |
Crane weight |
86~126.3t |
96.9~137.5t |
| 14 |
Max.wheel pressure |
30.1~22.9KN |
36.6~26.6KN |
Mechanical parts :
- Double welding box or trussed girder , beam deflection with DIN/FEM standard
- Steel Material: Chinese standard Q235B, Q345B, Q355E
- Trolley rail is made of high strength hot rolled flat steel (16 Mn)
- Epoxy zinc-rich painting for one bottoms and two sides of 120μm thick, to achieve a long lifespan, beautiful appearance and good luster
- The end beams are equipped with flat wheel or double rim wheels, anti-friction bearings, buffer blocks and derailment preventing end plate
- Maintenance walkway is located on one side of the main girder, high safety.
Safety system:
Weight overload protection
Emergency stop system
Over current protection,Short-circuit protection
Phase sequence protection
Zero position protection
Voltage loss protection
crane long traveling and cross traveling limit switch and stopper
Lifting overhigh and overlow limit switch
Design standard:
Overhead crane and gantry crane manufacturing and tolerances of rail installation GB/T10183-2005
Crane test specification and procedures GB/T5905-1986
Crane electric control equipment JB/T4315-1997
Important application wire rope GB8918-2006
Carbon structure steel GB/T700-2006
Low alloy high strength structure steel GB/T1591-2008
Welding joint radiographic inspection standard JB928-1994
Steel welding joint manual ultrasonic flaw detection way GB11345-1989
Installation Services
Henan Mine Crane Co.,LTD crane could supply not only grab gantry crane but also the solutions, firstly, we will supply grab gantry crane design, grab gantry crane manual, grab gantry crane drawing, grab gantry crane wiring diagram, grab gantry crane electrical diagram and grab gantry crane safety video before or after delivery, our technician will do supervision the installation according to the document, of course, the customer can do installation by themselves according to their requirement.
After installation, our technician will indicate to do the load test according to the overhead crane load test procedure, then overhead crane operator training and overhead crane maintenance training, all the procedure will be made according to the overhead crane training videos and overhead crane training PowerPoint,
English
