Home » Products » Overhead Crane » Single Girder Overhead Crane » Top Quality Remote Control Single Beam or Girder E.O.T Metallurgy Charging Crane

Top Quality Remote Control Single Beam or Girder E.O.T Metallurgy Charging Crane

LDY metallurgical single beam overhead crane is mainly used for metallurgical and foundry places where molten metal is lifted. Its lifting mechanism is YHⅡ metallurgical electric hoist, and its lifting capacity is no more than 10t.

The bottom of the main beam of the crane adopts special heat insulation treatment; the working environment temperature is -10℃~60℃, and the relative humidity does not exceed 50% at a temperature of 40℃. Other places where molten non-metallic materials and hot solid metals are lifted can also be used as reference.

Send Inquiry

Description:

1.Capacity:2,3,5,10t

2.Span: 7.5-28.5m

3.Lifting height: 9,12,15,18,20

4.Lifting speed:7,8m/min

5.Widely used in:Steel factories, Working at work level A6, working environment temperature ≤60℃, relative humidity ≤85﹪, altitude below 2000m, working under non-corrosive medium environment conditions.

Parameter

Lifting weight(T) 1 2 3 5 10
Span(m) 7.5-28.5
Max Lifting height(m) 9,12,15,18,20
Working class A6
Main Hoisting Speed(m/min) 8,7
Trolley Cross Traveling Speed(m/min) 20
Crane Long Traveling Speed(m/min) 30,3~30(frequency inverter)
Motor Type Squirrel cage motor
Motor (Kw) Main Hoisting 1.5 3 4.5 7.5 13
  Trolley Cross Traveling 1*0.4,1*0.8,2*0.8
  Crane Long Traveling 2*0.4,2*0.8,2*1.5
Control mode Pendent line control,Remote control
Recommended Rail model I20a~45c,I40b~63c
Power source 3Ph A.C 50Hz 380V

 

Hot Products
Name * E-mail *
Tel Country Message *
x