Top Sale Monorail Travelling Remote Wireless Control Single Lifting Speed or Double Lifting Speed Wire Rope Electric Hoist

Product introduction:

The CD MD type wire rope electric hoist is a small sized lifting equipment, which can be mounted on the straight or curved I-beam of single beam overhead bridge crane,single girder gantry crane and cantilever jib crane, It is a common lifting equipment that is used in factories, mines, sea port, warehouse, goods yard, stores for lifting, loading and unloading of heavy objects, it is a essential equipment to improve working efficiency and improving working conditions.

The capacities are from 250kgs up to 16tons,lifting height up to 30m,single or double lifting speeds,working voltages are 380v50hz3ph or customized,pendent line control or remote control,working class A3 A4.

The CD MD type wire rope electric hoist has features of compact structure, light weight, small size, strong versatility of parts and components, and convenient operation.

Technical parameters：

Mechanical Parts:

motor, transmission mechanism, reel and wire rope. The motor and the reel can be roughly divided into four types based on the different positions of each other.

(1) The electric hoist whose motor axis is perpendicular to the axis of the drum adopts worm gear transmission, which is large in width, heavy in structure, low in mechanical efficiency, and difficult to process. No manufacturer produces products of this type of structure anymore. Wire rope electric hoist

(2) The electric hoist with the motor axis parallel to the drum axis has the advantage of small height and length.Its disadvantages are large width, grouping, and complicated manufacturing and assembly. The track turning radius is large.

(3)The electric hoist with the motor installed in the drum has the advantages of small length and compact structure. Its main disadvantages are poor heat dissipation conditions of the motor, poor grouping, inconvenient inspection, installation, and maintenance of the motor, and complicated power supply devices.

(4) The electric hoist with the motor mounted on the outside of the drum has the advantages of good grouping, high degree of generalization, easy to change the lifting height, and convenient installation and maintenance. The disadvantage is: the length is large.

Safety System:

1.Hook protection device   : The hook should be equipped with a protection device to prevent accidental decoupling of the lifting load, that is, a safety hook with a safety claw is used.

2.Rope guide  : Spiral structure, the compressed wire rope can not be buckled indiscriminately, while moving left and right. The rope guide has a fork to move the baffle on the lifting limiter lever to achieve the upper and lower limit positions. Power off.

3.Overload limiter: The overall error should not be greater than 8%. When the load reaches 90% of the rated lifting capacity, it should be able to send out an indicative alarm signal. When the load reaches 105% of the rated lifting capacity, it should send out an alarm signal. Automatically cut off the lifting power source.

4.Torque limiter: The overall error should not be greater than 10%. When the load torque reaches the rated lifting torque, it can automatically cut off the power source for lifting or luffing.

5.Lift limit position limiter: When the lifting limit position of the spreader must be adjusted, it will automatically cut off the power source for lifting. For the hydraulic lifting mechanism, a prohibitive alarm signal should be given.

6.Lower limit limit position limiter: When the spreader must be adjusted to drop to the lower limit position, it can automatically cut off the power source of the descent to ensure that the steel wire rope is wound on the drum not less than the number of turns designed.